10th medal tee

As some may be aware this tee had a slope on it that tended to push golfers shots into the trees on the right hand side.  When we used the laser level we found this to be around a 10 inch fall from side to side.  We stripped the turf back and levelled off accordingly.  We rotivated in 3 tonnes of sand.  Raised the tee surface and shaped the surrounds to stop a majority of the water shedding onto the tee.  We have finished turfing the tee top there is just a bit of final shaping in the surrounds and we hope to get this tied up by the weekend.

Winter work

This week we have looked to make a start on our winter work, amongst other jobs we are going to be levelling off a few off the most undulating tees.  We started on the 4th medal tee.  The turf was lifted, the surface was then rotivated and we added a few loads of sand to lighten up the rootzone mix.  We then levelled the tee off, put the wacker plate across, gave the tee a final level off and finally the turf was then relaid.  Please stay off this tee as it needs time to bed in.